Item |
Model |
High Speed Chip Shooter
KE-3010AM/KE-3010VL/KE3010XL |
High Speed Flexible Mounter
KE-3020VAM/KE-3020VAL/KE-3020VXL |
|
|
Board Size |
M size(330x250mm |
O |
O |
|
|
L size(410x360mm) |
O |
O |
|
|
L-Wide size(510x360mm) ※1 |
O |
O |
|
|
XL size(610x560mm) |
O |
O |
|
|
Applicability to long PwB (M size)※2 |
650x250mm |
|
|
Applicability to long PwB (L size)   ※2 |
800x360mm |
|
|
Applicability to long PWB (L-Wide size)  ※2 |
1,010x360mm |
|
|
Applicability to long PWB (XL size)  ※2 |
1,210x560mm |
|
|
Component Height |
6mm |
O |
|
|
|
12mm |
O |
O |
|
|
20mm |
|
O |
|
|
25mm(XL size) |
|
O |
|
|
Component Size |
Laser Recognition |
|
0402(01005) ~ â–¢ 33.5mm |
0402(01005) ~ â–¢ 33.5mm |
|
|
Vision Recognition |
Standard Camera |
3mm ※3~ ▢ 33.5mm |
3mm ※3 ~ ▢ 74mm or 50*150mm |
|
|
High-resolution camera |
1.0*0.5mm ※4 ~ ▢ 20mm |
1.0*0.5mm  ※4 ~ ▢ 48mm or 24*72mm |
|
|
Placement Speed |
Chip |
(Optimum) |
23,500CPH |
20,900CPH |
|
|
(IPC9850) |
18,500CPH |
17,1 00CPH |
|
|
IC ※5 |
|
9,000 CPH ※6 |
9,470CPH ※6 |
|
|
Placement Accuracy |
Laser Recognition |
±0 . 05mm(±3o) |
|
|
Vision Recognition |
± 0.04mm |
± 0.03mm(MNVC ±0.04mm) |
|
|
Feeder Inputs |
Max.160 in case of 8mm tape (on a Electric double tape feeder) ※7 |
|
|
Power Supply |
200 to 415 VAC,3-phase |
|
|
Apparent Power |
2.2KVA |
|
|
Operating Air Pressure |
0.5±+0.05Mpa |
|
|
Air Consumption |
50L/min |
|
|
Machine Dimensions
(W*D*H※8)※9 |
M size |
1,500×1,580×1,500mm |
|
|
L size |
1,500×1,690×1.500mm |
|
|
L-Wide size |
1.800×1.690×1.500mm |
|
|
XL size |
2,131×1,890×1.500mm |
|
|
Mass
(approximately) |
M size |
1850kg |
|
|
L size |
1900kg |
|
|
XL size |
2250kg |
|
|
※1 L-Wide size is optional!
※2 Applicability to long PWB is optional,
※3 Wen using MNvc. (option)
※4 KE-3010A : When using both high-resolution camera and MNVc. (option)
KE-3020VA: When using high-resolution camera. (option) |
※5 Effective tact : The lC placement speed indicates an estimated value obtained when the machine places 36 QFP (100 pins or more)or BGA components (256 balls or more) on a M size board, (CPH=number of components placed for one hour)
※6 Estimated value when using MNVC and picking up components simultaneous with all nozzles.
MNVC is option in the KE-3010A .MNVC is standard in the KE-3020VA,KE-3020VRA.
※7 When using Electric double tape feeder EF0BHD
※8 Display is not included in height.
※9 Dimensions of machine described are for conveyor height 900mm. |
|
|
|
|
|
|
|
|
|
|
|
|
Options |
|
|
|
|
Recognition system |
MNVC:※1/Bad mark reader /High-resolution camera |
|
|
Operation System |
Rear-side operation unit /Touch panel |
|
|
Inspection function |
Coplanarity sensor /Component Verification System (CVS) /$OT detection check function |
|
|
Conveyor |
Automatic board width adjustment / Conveyor extension / L-Wide size / Applicability to long PWB |
|
|
Electrical protection |
Ground-fault interrupter |
|
|
Others |
FCS calibration jig / Feeder position indicator / Offset placement after solder screen-printing |
|
|
Non-stop operation / Caster/Super foot / Connector bracket / Mini signal light tower / lionizer/ Pin Reference |
|
|
Placement force control / Solder lighting / Residual PWB quantity control / Placement Monitor |
|
|
Software |
IS/1S-Lite /IFS-NX/EPU |
|
|
Component handling and feeders ※2 |
Matrix Tray Sever TR5 / Matrix Tray Changer TR6 / High Speed Matrix Tray Sever TR7D / Matix Tray Holder / |
|
|
Dual Tray Server TR1 / Tape feeder / Bulk feeder. ※3 / Stick feeder / Feeder trolley / 1C collection belt / Trash box / |
|
|
Tape cutter /feeder stocker /Fluxer unit / Tape reel mounting base |
|
|
※1 MNVC is option in the KE-3010A. MNVC is standard in the KE-3020VA.
※2 Component supply units are different either by mechanical or electric feeder bank, Make sure correct component supply unit be selected.
※3 For commercial bank only |
|
|