Control system
- Siemens PLC + Kunlun open state touch screen control, simple operation,
- Each temperature zone is controlled by the PID temperature to achieve accurate temperature control in the multi-temperature zone,
- With leakage protection switch to ensure the safety of operators and control system;
- There is a double-layer overcurrent protection system, to ensure that the equipment circuit can be timely power off, to protect the safety of the equipment electrical system.
- With super temperature and low temperature alarm system, to ensure the equipment heating safety and normal production.
- Alarm mode: audio and light automatic alarm.
Transportation system
- Chain automatic lubrication, to ensure the smooth PCB transportation;
- Chain transmission operation, controlled by the computer fully closed cycle, can meet the different varieties of PCB production at the same time;
- High-strength guide rail design, small thermal deformation, to ensure the accuracy;
- Guide rail width adjustment by manual width adjustment, panel control, easy to use;
- Mode of transportation: chain
Heating system
- Using infrared heating pipe heating mode, heating pipe is a special φ 10mm fiberglass pipe;
- Infrared heating tube above is equipped with a radiation cover, the maximum infrared heat radiation to the PCB plate, heating up rapidly, the maximum temperature can reach 150℃;
- Divided into two temperature zone heating, temperature area temperature independent control;
- Seven infrared emitting tubes at each temperature area, at uniform mercy;
- The furnace and the inner tank are using special materials, and the peripheral thickened insulation cotton can ensure minimal heat loss, and the temperature area temperature is independently controlled
Safe way of opening on the upper furnace body
- The lifting mechanism of the electric wire rod and the span space of science and technology make the lifting of the furnace body safe and reliable, without deformation;
- The electric lift with a lock will be the motor and will not slide under power failure to ensure safety.
High efficiency and energy saving
- With a very low start and average power;
Equipment Parameters
Model | HJE-IR2000) |
External size(L*W*H) | 2000*960*1250 |
Weight | Approx450 |
The PCB transmission height of the No | 900±20mm |
PCBAAM-adjusted width: PCBA | 50~450mm |
Transfer direction | Left oneself right |
Transportation with speed | 700~2000mm/min |
Transmission motor power | 90w |
Temperature control range | ±1.5℃ |
Temperature control accuracy | ±3 |
Heating temperature area | 2 Heating area |
Heating-up time | Approx.20min |
Electric source | 5-Line 3-phase 380V |
Initial power | 8KW |
Mean power | Approx.2.5KW |